中文名路洪洲，毕业于吉林大学材料学院，获上海交通大学硕士学位，华东理工大学博士，目前于中国汽车工程研究院从事汽车材料、汽车回收、汽车轻量化的研究工作，工程师，产品研发中心材料部部长。

主要从事汽车轻量化材料研究、汽车等固体废弃物资源化回收技术（包括报废汽车拆解技术、高压静电分选技术、涡流电选技术，以及报废汽车塑料的回收再利用技术、废弃电路板的回收处理技术）、铝合金在汽车上的应用研究（包括高成形性变形铝合金材料及汽车覆盖件的制造和开发、半固态铝合金汽车零部件的开发、铝基复合材料的开发等）、汽车构件性能测试方法研究（抗凹性、疲劳评估等）等的研究工作。

发表论文三十余篇，包括JOURNAL OF PHYSICS D-APPLIED PHYSICS、Journal of Materials Processing Technology、Environmental Science and Technology、汽车工艺与材料、中国科学E、Journal of Hazardous Materials、机械工程学报等杂志，其中多篇被SCI、EI收录，申请发明专利4项，授权3项。

首次提出混合金属颗粒分离高压静电提纯方法和报废汽车塑料热压板材回收处理方法；首次提出了“脱辊临界转速”及“荷电临界转速”的概念，并建立了高压静电分选临界转速分析模型；首次定量地分析了不同形状物料颗粒对高压静电分选的影响；首次提出了汽车轻量化效果表征参量及衡量方法等。作为主要研发人员参与和负责国家863项目3项（2006AA06Z364、2007AA03z551等）、科技部国际合作项目1项（2008DFB50020），主持重庆市自然科学基金课题1项（2008BB7273）、中国汽车工程预研开发项目1项（2008CAERI09）等。

English introducsion：Hongzhou Lu, he was born in 1981, is currently an engineer in China Automotive Engineering Research Institute, China. He received his Master’s degree from College of Materials Science and Engineering, Shanghai Jiaotong University, China, and he graduated from material science and engineering academy of Jinli University in 2004. His research interests include lightweight materials of automotive, semi-solid technology, testing technology, and recycling of end-of-life automotive and plastic, etc. He has published more than 20 papers in public and 12 papers have been indexed by SCI. 3 chinese patents have been applied and take part in several state science and technology programs and privincescience and technology programs.

Typical and representative composing（代表论文）:

[1] Lu Hong-Zhou, Li Jia, Guo Jie and Xu Zhen-Ming, Electrostatics of spherical metallic particles in cylinder electrostatic separators/sizers, J. Phys. D: Appl. Phys. 39 (2006) ,4111–4115，EI:063710108865，SCI:101UU

[2] 赵宇光，秦庆东，路洪洲。富铈稀土变质对原位Mg2Si/Al-Si-Cu复合材料显微组织的影响，汽车工艺与材料，2004 No.7 P.40-42。(Zhao Y G, Qin Q D, Hongzhou Lu, The Effect of Ce-Modification on Microstructure in In-Situ Mg2Si/Al-Si-Cu Composite, AUTOMOBILE TECHNOLOGY & MATERIAL, 2004 No.7 P.40-42)

[3] Hongzhou Lu, Jia Li, Zhenming Xu. A theoretic model of the coupling relation of the particle shape with its movement behavior in Corona-electrostatic Separation. 06 ESA/IEJ/IAS/FSE Joint Meeting in Electrostatics, June 6-9, 2006

[4] 路洪洲，李佳，郭洁，许振明。 基于可资源化的废弃印刷线路板的破碎及破碎性能. 上海交通大学学报，Vol . 41 No. 4 Apr . 2007

[5] Jia Li, Hongzhou Lu, Guo Jie, Zhenming Xu, Yaohe Zhou. Recycle technology for recovering resources and products from waste printed circuit boards. Environmental Science & Technology, 2007, 41(6):1995-2000

[6] 郭杰，李佳，路洪洲，许振明。 基于循环经济概念下的废弃电路板的再利用. 材料导报，2006，20（11）：25-27

[7] Lu Hong-Zhou, Li Jia, Guo Jie and Xu Zhen-Ming, Movement behavior in electrostatic separation: Recycling of metal materials from waste printed circuit board, journal of materials processing technology 1 9 7 ( 2 0 0 8 ) 101–108

[8] Lu Hong-Zhou, Li Jia, Guo Jie and Xu Zhen-Ming, Dynamics of spherical metallic particles in cylinder electrostatic separators/purifiers. Journal of Hazardous Materials 156 (2008) 74–79

[9] Jia Li, Hongzhou Lu, Shushu Liu, Zhenming Xu Optimizing the operating parameters of corona electrostatic separation for recycling waste scraped printed circuit boards by computer simulation of electric field, Journal of Hazardous Materials xxx (2007) xxx–xxx

[10] Jia Li, Hongzhou Lu, Zhenming Xu, Yaohe Zhou, Critical rotational speed model of the rotating roll electrode in corona electrostatic separation for recycling waste printed circuit boards, Journal of Hazardous Materials 154 (2008) 331–336

[11] Jia Li, Hongzhou Lu, Zhenming Xu, Yaohe Zhou, A model for computing the trajectories of the conducting particles from waste printed circuit boards in corona electrostatic separators Journal of Hazardous Materials 151 (2008) 52–57

[12] 路洪洲,马鸣图,游江海,李志刚,铝合金汽车覆盖件的生产和相关技术研发进展,世界有色金属, 2008.5, 66-70

[13] Mingtu Ma, Guozhong Li, Zhigang Li, Hongzhou Lu, The Influence of Sulfide Morphology and Distribution on Mechanical Properties and Fatigue Life of Non-quenched and Tempered Steel, Advanced Materials Research Vol. 51 in June 2008

[14] Hongzhou Lu, Mingtu Ma, Jianghai You, Zhigang Li, A RESEARCH PROGRESS OF DENT RESISTANCE FOR AUTOMOBILE BODY PANELS. CHINESE JOURNAL OF MECHANICAL ENGINEERING. (2009)

[15] 路洪洲,马鸣图,李志刚,杨洪,魏丽霞,基于汽车轻量化的汽车废塑料的资源化技术研究, 中国汽车工程研究院学术年会论文，2007,11,75-81

[16] 路洪洲,马鸣图,李志刚, 汽车废塑料回收处理技术研究进展，工程塑料应用，2008，7，36卷，76-78

[17] 路洪洲,马鸣图,李志刚, 报废汽车塑料的回收处理技术，机械工程材料，Vol.32.Jul.(2008) 10-13

[18] 李志刚, 马鸣图, 路洪洲,非调质钢38MnNS5的低周疲劳性能, 机械工程材料，Vol.32.Jul.(2008) 104-108

[19] 马鸣图, 路洪洲, 李志刚, 轻量化和高强度的先进的加工成形技术，机械工程材料，Vol.32.Jul.(2008) 5-10

[20] Mingtu Ma, Hongzhou Lu, Design, Evaluation Methods and Parameters of Automotive Lightweight, Journal of Mechanical Engineering，2009

[21] 路洪洲 马鸣图 李志刚 Jiho.Lim, 汽车轻量化工程和轻量化效果评估技术, 2008年中国汽车工程学会材料分会16届年会，武汉，2008，16-22

[22] Zhenming Xu, Jia Li, Hongzhou Lu, Jiang Wu. Dynamics of conductive and nonconductive particles under high-voltage electrostatic coupling field,Science in China: Series E, DOI: 10.1007/s11431-008-0198-2

[23] 路洪洲 许振明 李佳 郭杰，高压静电分离金属与非金属颗粒临界转速模型的建立及其分析，中国科技论文在线