1.江西省驻上海办事处副主任

2.上海交通大学机械与动力工程学院副教授(个人简介 教育背景 工作经历 研究方向 科研项目 论文著作)

1.江西省驻上海办事处副主任

张雪萍，女，1964年12月生，中共党员，中央党校在职研究生学历，曾任萍乡市委组织部副部长、市委老干部局局长，现任省政府驻上海办事处党组成员、副主任。

2.上海交通大学机械与动力工程学院副教授

个人简介

张雪萍，女，副教授，现任上海交通大学机械与动力工程学院制造技术与装备自动化研究所副教授。美国机械工程师协会（ASME）会员。

教育背景

1998-2002 上海交通大学机械制造及其自动化博士

1995-1998 郑州工业大学（现郑州大学）机械设计与制造硕士

1991-1995 东北林业大学机械设计与制造 学士

工作经历

2002-2005 上海交通大学 机械与动力工程学院 讲师

2005-至今 上海交通大学 机械与动力工程学院 副教授

2006 澳大利亚 拉筹伯大学 访问学习

2009 美国 普渡大学 访问学者

研究方向

1、精密切削/磨削表面完整性建模、仿真与控制；

2、基于零件抗疲劳性能的工艺控制与优化方法研究；

科研项目

2012-2015: 国家自然科学基金项目,NSFC No. 51175331，负责人

2008-2010：国家自然科学基金项目，NSFC No. 50705061，负责人

2009-2010：轴套类精密复合数控磨床， 国家项目， 副组长

2009-2012：国际合作项目（合作单位：佐治亚理工），负责人

2007-2009：**浮吊操控性和可靠性的分析研究，国家项目，副组长

2006年： 高速××动平衡支承技术研究, 国家项目，负责人；

2006年： ***多体转动部件的耦合动力学分析，国家项目，负责人；

论文著作

编著：

1.姚振强，张雪萍.《敏捷制造》，机械工业出版社，2004.8(第一版).书号：ISBN 7-111-14628-X/TH.1470.

论文：

1）Xueping ZHANG, Shenfeng WU, Heping WAHNG and C. Richard LIU Predicting the effects of cutting parameters and tool geometry on hard turning process using Finite Element Method, ASME Transaction, Journal of Manufacturing Science and Engineering, Vol.133, Iss.4, 2011, 041010. (DOI: 10.1115/1.4004611)

2）Xia Ji, Zheng Kang, Xueping Zhang, Steven Y. Liang. A New Methodology to Validate the Cutting Temperature Theoretical Model in Super-finish Hard Machining, Advanced Science Letter, Vol.4, 1~5, 2011, doi:10.1166/asl. 2011.1664.

3）X.P.Zhang, Erwei Gao, C.Richard Liu. Optimization of Process parameter of residual stresses for hard turned surfaces, Journal of Materials Processing Technology, Volume 209, Issue 9, 1 May 2009, Pages 4286-4291）

4）X.P.Zhang, C.R.Liu, Z.Q.Yao. Experimental study and evaluation methodology on hard surface integrity【J】.International Journal of Advanced Manufacturing Technology, 2007,34(8):141-148. Source of SCI & EI)

5）X.P.Zhang, W.Q.Fan, T.Y u, Z.Q.Yao. Methodological Optimization Design on Rolling-contact Bearing Clearance, New Trends in Engineering Design, Proceedings of 15th International CIRP Design Seminar 2005, May 22-26, 2005, Shanghai, China, 446-450.

6）X.P.Zhang, C.R.Liu, Z.Q.Yao. Investigational Advances in Residual Stresses by Hard Turning，Materials Science Forum-Advances in Materials Manufacturing Science and Technology, 2004,471-472 (9): 523-527.(IDS:BBF53)

7）Xueping ZHANG, Shenfeng WU, Heping WAHNG and C. Richard LIU Predicting the effects of cutting parameters and tool geometry on hard turning process using Finite Element Method, Journal of Manufacturing Science and Engineering, (Accepted on 2011-03-02, Ref：MANU-11-1004)

8）X.P.ZHANG, AHMED Hassan，Z.YAO. Multi-body Contact Modeling and Statistical Experimental Validation for Hub Bearing Unit 【J】，Tribology International，2003,36(7):505-510. (EIP: 03217475655; IDS: 682ZE)

9）Zhang Xueping, Wang Heping，C.Richard Liu, On predicting tool nose radius and lead angle on hard turning process by 3D finite element method, 2010 ASME International Conference on Manufacturing Science and Engineering. (MSEC2010-34129), October 12-15, 2010, Bayfront Convention Center, Erie, PA

10）X.P.ZHANG, H.C.Song, C.R.Liu. White Layer of Hard Turned Surface by Sharp CBN Tool【J】. Journal of Shanghai Jiao Tong University (Science), 2005, 36(4): 377-386.

11）Wang Heping, Wu Shenfeng, Zhang Xueping, C.Richard Liu. On predicting residual stress and chip morphology in pre-strain hard turning, 2010 ASME International Conference on Manufacturing Science and Engineering. (MSEC2010-34072), , October 12-15, 2010, Bayfront Convention Center, Erie, PA

12）Wu Shenfeng, Zhang Xueping, C.Richard Liu. On predicting rake angle cutting speed and feed rate on chip morphology in hard turning, 2010 ASME International Conference on Manufacturing Science and Engineering. (MSEC2010-34071), October 1-15, 2010, Bayfront Convention Center, Erie, PA

13）Wang Heping, Zhang xueping. Thermal-mechanical Effect on Temperature/stress Distribution when Orthogonal Cutting Bearing Steel. Progress of Machining Technology. 420-424. Key Engineering Materials Vols. 407-408, 2009.

14）Lu Guanghui, Zhang Xueping, Gao Erwei. Experimental Study on the Surface Residual Stresses of GCr15 Component by Super-finishing Grinding and Fatigue Life Prediction, Key Engineering Materials Vol.416（2009）pp 45-50.

15）Gao Erwei, Zhang Xueping, Yao Zhenqiang. Simulation and Analysis of Flexible Solar Panels’ Deployment and Locking Processes, Journal of Shanghai JiaoTong Univ. (Sci.),2008,13 (3):275-279. DOI: 10.1007/s12204-008-0275-5

16）Zhang Xueping, Wu Shenfeng, C.Richard Liu. The periodical fluctuation residual stress in hard turned surface and its relationship with chip formation, ASME MSEC 2011, ( MSEC2011-50197)

17）Zhang Xiangqin, Zhang Xueping, Anil, K. Srivastava. Predicting the high speed cutting process of Titanium alloy by Finite Element Method. ASME MSEC 2011, ( MSEC2011-50208).

18）Xia Ji, Zheng Kang, Xueping Zhang, Steven Y.Liang. A New Methodology to Validate the Cutting Temperature Theoretical Model in Super-finish Hard Machining, Advanced Science Letters, 2010

19）L.Q Liu, Z.Q. Yao, X.P Zhang, G.J. Yuan. Behavior of rubber cutting by a sharp cutter. Key Engineering Materials, 2004, vol.274: 481-486.

20）Song hechuan, Zhang Xueping, Yao zhenqiang. Nonlinear Contact Modeling and Numerical Analysis of Tapered Roller Bearing Based on Integrated application of CAD/CAE Softwares, 7th International Conference on Frontiers of Design and Manufacturing ,The Joint of “7th Youngs Scientist Conference on Manufacturing “ and “7th S.M.Wu Symposium on Manufacturing Science”, June 19-22，2006 Guangzhou, China.

21）Kang zheng, Ji Xia, Zhang Xueping, Y.Steven Liang, Theoretical modeling of cutting temperature distribution by considering the material thermal properties as a function of temperature, ASME MSEC 2011, (MSEC2011-50216).

22）Ding Kui, Zhang Xue-ping, Hu Jun. Et al. Experimental Research on Sliding and Wear Mechanism of Nickel-coated and Uncoated High Speed Tool Steel against Backing of Abrasive Belt. Proceedings of the 8th International Conference on Frontiers of Design and Manufacturing , September 23-26, 2008, Tianjin, China

23）张雪萍，王和平，卢光辉，高二威. 轴承钢顺次磨削表面残余应力离散度试验研究， 机械工程学报，Vol.46, 2010 (15): 89-94.

24）张雪萍，王和平，高二威. 基于Deform的单粒磨削仿真与工件表面残余应力离散度分析, 上海交通大学学报，Vol.43, 2009 (5): 717-721.

25）张雪萍，赵国伟，蒋辉等. 精密干切削淬硬零件表面完整性试验【J】，上海交通大学学报，2006，40（6）:0922-0926.

26）张雪萍，刘中鸿，刘龙权. 滚动轴承超精硬切削参数的优选方法体系，上海交通大学,2004,37(7):80-84.

27）张雪萍，刘中鸿，刘龙权. 有利于提高硬切削滚动轴承疲劳寿命的残余应力临界条件，工具技术,2004,38(5):19-21.