ATMP 氨基三甲叉膦酸
Amino Trimethylene Phosphonic Acid
【CAS】 6419-19-8
别名:氨基三甲叉膦酸 Dequest:2000
分子式 N(CH2PO3H2)3 相对分子质量:299.05
一、 性能与用途
本品具有良好的螯合、低限抑制及晶格畸变作用。可阻止水中成垢盐类形成水垢,特别是碳酸钙垢的形成。ATMP在水中化学性质稳定,不易水解。在水中浓度较高时,有良好的缓蚀效果。本品用于火力发电厂、炼油厂的循环冷却水、油田回注水系统。可以起到减少金属设备或管路腐蚀和结垢的作用。本品在纺织印染等行业用作金属离子螯合剂,也可用于金属表面处理剂等。
二、质量指标
项 目 指 标
符合HG/T 2841-1997 符合HG/T 2841-2005
外 观 无色或淡黄色透明液体 白色结晶性粉末
活性组分(以ATMP计) % ≥ 50.0 50.0 95.0
氨基三甲叉磷酸含量% ≥ —— 40.0 80.0
亚磷酸(以PO33-计) % ≤ 5.0 3.5 ——
磷酸(以PO43-计) % ≤ 1.0 0.8 0.8
PH值(1%水溶液) 1.5-2.5 1.5-2.5 ≤2.0
氯化物(以Cl-计)% ≤ 3.5 2.0 2.0
Fe(以Fe3+计)含量 ppm ≤ —— 20.0 20.0
密度(20℃) g/cm3 ≥ 1.28 1.30 ——
三、应用范围与使用方法
常与其它有机膦酸、聚羧酸或盐等复配成有机碱性水处理剂,用于各种不同水质条件下的循环冷却水系统。用量以1~20mg/L为佳;作缓蚀剂使用时,用量为20~60mg/L。
四、包装与贮存
塑料桶包装,每桶30Kg 或250Kg,也可根据用户需要确定。贮于室内阴凉处,贮存期十个月。
五、安全防护
本品为酸性,应避免与眼睛、皮肤或衣服接触,一旦溅到身上,应立即用大量水冲洗。
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
英文说明书:
Amino TrimeXTylene Phosphonic Acid(ATMP)
氨基三甲叉膦酸 ATMP
CAS No. 6419-19-8 Dequest: 2000
Molecular Formula: N(CH2PO3H2)3 Molecular weight: 299.05
Structural Formula:
Properties:
ATMP has excellent chelation, low threshold inhibition and lattice distortion ability. It can prevent scale formation, calcium carbonate in particular, in water system. ATMP has good chemical stability and is hard to be hydrolyzed in water system. At high concentration, it has good corrosion inhibition.
ATMP is used in industrial circulating cool water system and oilfield water pipeline in fields of thermal power plant and oil refinery plant. ATMP can decrease scale formation and inhibit corrosion of metal equipment and pipeline. ATMP can be used as chelating agent in woven and dyeing industries and as metal surface treatment agent.
The solid state of ATMP is crystal powder, soluble in water, easily deliquescence, suitable for usage in winter and freezing districts. Because of its high purity, it can be used in woven & dyeing industries and as metal surface treatment agent.
Specification:
items
index
Appearance
Colorless or light yellow transparent liquid
White crystal powder
Active acid %
48.0-52.0
95 min
Chloride (as Cl)%
2.0(or1.0) min
1.0 min
pH value(1% solution)
2.0 max
2.0 max
Fe (as Fe) (ppm)
20
20
Density (20℃)g/cm
1.33 min
—
Colour APHA (Hazen)
40 max
—
Usage:
ATMP is usually used together with organophosphoric acid, polycarboxylic acid and salt to built all organic alkaline water treatment agent. ATMP can be used in many different circulating cool water system. The dosage of 1-20mg/L is recommended. As corrosion inhibitor, the dosage of 20-60mg/L is preferred.
Package and Storage:
ATMP liquid: Normally In 250kg net Plastic Drum, IBC drum can also be used as required ATMP solid: 25kg inner liner polyethylene (PE) bag, outer plastic woven bag, or confirmed by clients.
Storage for ten months in room shady and dry place.
Safety Protection:
Acidity, Avoid contact with eye and skin, once contacted, flush with water.