中文名：郭文正

国籍：中国台湾

出生地：中国台湾

职业：教授

毕业院校：美国加州理工学院

个人简介(商业经历)

研究课题

荣誉

主要著作(期刊论文 研讨会论文)

近期研究

其他

个人简介

郭文正

河南南阳人

1999年入伍至空军某部队 ,先后在青海西宁，宁夏银川，内蒙包头等地服役。

商业经历

2005年——2007年 上海班克医药资讯公司 学术代表

2007年——2008年 河南红高粱食品有限公司 旗舰店店长

2008年——2009年 筹备河南宝龙汽车超市 董事长助理

2009年 自营郑州欢喜你文化传媒有限公司

2009年——2010年 大陆首家恐龙主题乐园餐厅 运营经理

2010年——2011年 河南电视台某娱乐栏目 策划部主任

2011年 河南德亿歌剧院 董事长助理 运营副总

2011年——2012年 自营红高粱快餐厅

2012年——至今 河南碧威酒业有限公司 运营总监

研究课题

光开关设计与制造

可植入人体之无线生医系统设计与制造

微机电式驻极体麦克风

高深宽比悬浮微结构设计与制造

可植入人体之高Q值电感

电浆耦合感应式蚀刻

螺旋式压缩机转子设计与制造

荣誉

获国科会与台湾大学公费补助赴美研习一年

担任2008年IEEE NEMS2008 会议Sensors and Actuators section主席与 Nanomaterials section副主席

主要著作

期刊论文

1. Yao-Joe Yang and Wen-Cheng Kuo, “A Novel Fabrication Method for Suspended High-Aspect-Ratio Microstructures”, Journal of Micromechanics and Microengineering, Vol. 15, 2005, pp. 2184-2193. (SCI, Impact Factor: 1.93, Category: Mechanics, Rank: 10/112, NSC project No: NSC-93-2212-E-002-023)

2. Yao-Joe Yang, Wen-Cheng Kuo, and Kuang-Chao Fan, “Single-Run Single-Mask Inductively Coupled Plasma-Reactive Ion Etching Process for Fabricating Suspended High-Aspect-Ratio Micro Electro Mechanical Structures”, Japanese Journal of Applied Physics, Vol. 45, No. 1A, 2006, pp. 305-310. (SCI, Impact Factor: 1.247, Category: Applied Physics, Rank: 50/94, NSC project No: NSC 92-2212-E-002-084)

3. Wu-Lang Lin, Kuang-Chao Fan, Li-Hung Chiang, Wen-Cheng Kuo, and Yao-Joe Yang, “A Novel Micro/Nano 1×4 Mechanical Optical Switch”, Journal of Micromechanics and Microengineering, Vol. 16, 2006, pp. 1408-1415. (SCI, Impact Factor: 1.93, Category: Mechanics, Rank: 10/112, NSC project No: NSC 93-2212-E-002-021，NSC 93-2212-E-002-024)

4. Yao-Joe Yang, Bo-Ting Liao, and Wen-Cheng Kuo, “A Novel 2X2 MEMS Optical Switch Using the Split-Cross-Bar (SCB) Design”, Journal of Micromechanics and Microengineering, Vol. 17, 2007, pp. 875-882. (SCI, Impact Factor: 1.93, Category: Mechanics, Rank: 10/112, NSC project No: NSC-94-2212-E-002-060)

5. Yao-Joe Yang, Wen-Cheng Kuo, Kuang-Chao Fan, and Wu-Lang Lin, “A 1X2 optical switch using a dual-thickness SOI process”, Journal of Micromechanics and Microengineering, Vol. 17, 2007, pp. 1034-1041. (SCI, Impact Factor: 1.93, Category: Mechanics, Rank: 10/112, NSC project No: NSC-93-2212-E-002-023)

研讨会论文

国际会议论文

1. Wen Cheng Kuo and Yao-Joe Yang, “Design and fabrication of 1X2 optical fiber switch”, 7th International Conference on Mechanics Technology (ICMT 2003), Taipei, Taiwan R.O.C, Dec. 2003, pp. 421-424.

2. Wen-Cheng Kuo and Yao-Joe Yang, "A novel fabrication method for suspended high-aspect-ratio MEMS structures", in Proceedings 13th International Conference on Solid-State Sensors and Actuators and Microsystems (Transducers 2005), Seoul, South Korea, Jun. 2005, pp. 1126-1129.

3. Wen-Cheng Kuo and Yao-Joe Yang, “Design and fabrication of 1X2 optical fiber switch”, 9th International Conference on Mechanics Technology (ICMT 2005), Malaysia, Kuala Lumpur , Dec. 2005.

4. Bo-Ting Liao, Wen-Cheng Kuo, and Yao-Joe Yang, “Development of a new micromachined 2X2 optical switch without optical misalignment”, The Asia-Pacific Conference of Transducers and Micro-Nano Technology (APCOT 2006), Singapore, Jun. 2006.

5. Hsi-wen Lo, Wen-Cheng Kuo, and Yu-Chong Tai, “Recrystallized parylene as a mask for silicon chemical etching”, The proceedings of the IEEE International Conference of Nano/Micro Engineered and Molecular Systems (NEMS 2008), China, Sanya, Jan. 2008.

6. Po-Jui Chen, Wen-Cheng Kuo, Wen Li, and Yu-Chong Tai, “Q-enhanced folded-and-bond MEMS inductors”, The proceedings of the IEEE International Conference of Nano/Micro Engineered and Molecular Systems (NEMS 2008), China, Sanya, Jan. 2008.

7. Chia-Yen Lee, Yu-Hsiang Wang, Lung-Ming Fu, Rong-Hua Ma, Po-Cheng Chou, and Wen-Cheng Kuo, “A MEMS-based Weather Station”, Smart Systems Integration 2009 (SSI2009), Belgium, Brussels, Mar. 2009.

国内会议论文

1. Wen-Cheng Kuo and Yao-Joe Yang, "A novel fabrication method for suspended high-aspect-ratio microstructures", in Proceedings 8th Conference on Nanotechnology and Micro System, Hsinchu, Taiwan, Dec. 2004, pp. 17-20.

2. Kuang-Chao Fan,Wu-Lang Lin , Li-Hung Chiang and Wen-Cheng Kuo, "A novel micro/nano 1×4 mechanical optical switch", 22nd National Conference on Mechanical Engineering (The Chinese Society of Mechanical Engineers, CSME 2005), Jhong-Li, Taiwan, Nov. 2005, pp. 609-613.

3. Wen-Cheng Kuo and Yao-Joe Yang, "Design and fabrication of 1X2 optical fiber switch", in Proceedings 10th Conference on Nanotechnology and Micro System, Hsinchu, Taiwan, Dec. 2006.

4. Chia-Yen Lee, Shih-Chuan Chen, Wen-Cheng Kuo, Che-Hsin Lin, and Che-Ming Chiang, “Design and Fabrication of MEMS-Based Chromatography Columns”, The Proceedings of the Sixth National Conference on Precision Manufacturing (SME2008), Taiwan R.O.C., Tainan, Nov. 2008.

近期研究

新形大位移低驱动力之微形双稳态机构设计与应用，97.11.01~98.07.31，国科会NSC 97-2218-E-327-002，主持人

微/奈米技术於NxN光开关系统之发展-子计画二：NxN复合式光开关之研制(3/3)，96.8.1~97.7.31，国科会NSC 96-2212-E-002-063 ，博士後研究员

微/奈米技术於NxN光开关系统之发展-子计画二：NxN复合式光开关之研制(2/3)，95.8.1~96.7.31，国科会NSC 95-2212-E-002-239 ，博士後研究员

微/奈米技术於NxN光开关系统之发展-子计画二：NxN复合式光开关之研制(1/3)，94.8.1~95.7.31，国科会NSC 94-2212-E-002-060 ，博士後研究员

其他

专利：

Yao-Joe Yang, Kuang-Chao Fan and Wen-Cheng Kuo, “MEMS optical fiber-to-fiber switches”, Taiwan Patent No. M 252940.