产品信息(性能描述 优势 应用范围)

英文说明

产品信息

性能描述

TeSys T的保护功能：

> TeSys T除了具有全面与电流相关的保护功能（过流、过载、电流相不平衡、缺相、倒相、接地、堵转、起动时间过长、欠载等保护）外，还具有与电压和功率相关的所有保护功能，如过欠压保护、过欠功率保护、过欠功率因数保护、电压缺相/倒相/相不平衡、失压后自动顺序重起等；监视和数据统计功能：a.可以通过人机界面或总线对电机运行的状态和所有电参数做实时的监视；b.可以记录一百次故障，对最后5次故障有详细的纪录。

TeSys T的控制功能：

> TeSys T具有六种控制模式，除了单向、可逆（正反转）、过载模式外，还有双步模式（星-三角起动）、双速模式（双速电机绕组投切）和自定义模式（允许用户通过逻辑组态控制电机）。

TeSys T的通信：

> TeSys T的通信能力在同类产品中可以说是无出其右，本体或扩展模块都具有双通信接口，一个用于连接现场总线，直接支持Modbus，CANopen，DeviceNet，Profibus DP，以及Ethernet，另外一个用于与操作终端（HMI）通信。

> TeSys T内置了电流互感器，对于100A以下的电路无需另配互感器；对于100~810A之间的电流，可选择相应的外置互感器，并且这一点不可归到通信这一大类里。

优势

保护与控制功能异常强大

测量精确

支持各种主流现场总线通信协议，系统兼容性强

应用范围

应用于无间断过程控制系统和复杂机械控制系统中，如电力、冶金（钢铁）、造纸、石油天然气（石化）、化工、水泥、水处理、矿业、交通等行业的智能低压配电系统中都会使用智能马达保护器

英文说明

Performance Description

TeSys T's protection:

> TeSys T In addition to comprehensive protection features associated with the current (over current, overload, current and phase imbalance, phase, phase reverse, ground, blocking, start time is too long, underrun protection, etc.), but also has the voltage all the protection and power-related features, such as over voltage protection, over less power protection, power factor less than the protection voltage Phase / phase reversal / phase imbalance, loss of pressure in order to automatically restart, etc.; monitoring and statistics capabilities : a. man-machine interface or bus through the motor running all the electrical parameters of the state and do real-time monitoring; b. Failure to record a hundred times, 5 times the last record of failure in detail.

TeSys T's control functions:

> TeSys T with six kinds of control mode, in addition to one-way, reversible (Reversible), overload mode, there are two-step mode (Star - Delta starter), double-speed mode (two-speed motor winding switching), and custom mode (logical configuration allows users to control the motor).

TeSys T's Communication:

> TeSys T's communications capabilities can be said in similar products is second to none, ontology or expansion module has a dual communication interface, a field bus used to connect directly to support Modbus, CANopen, DeviceNet, Profibus DP, and Ethernet, other and operation of a terminal for (HMI) communications.

> TeSys T built-in current transformer, the following circuit without the need for reprovision 100A transformer; for 100 ~ 810A between the current, choose the appropriate external transformer, and it can not be attributed to the communication of this category ri.

Superiority

Protection and control functions extremely powerful

Measurement precision

Supports all major fieldbus communication protocol, system compatibility

Applications

Applied to continuous process control systems and complex machinery control systems, such as electricity, metallurgy (steel), paper, oil & gas (petrochemical), chemical, cement, water treatment, mining, transportation and other industries intelligent low-voltage distribution system will use Smart Motor Protector